Load data for .30 PICRA + .308 | 150gr | Speer TBBC

Recommended Powder(s):

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 150gr \| Speer TBBC
Manufacturer SKU:	1759
Bullet Weight:	150gr \| 9.7g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	1.100" \| 27.9mm
Caliber:	.30 PICRA load data
Case Length (l3):	1.291" \| 32.8mm
Cartridge Length (C.O.L.):	2.172" \| 55.2mm
Seated Depth:	0.219" \| 5.6mm
Shank Seated Depth:	0.219" \| 5.6mm
Case Capacity:	24.2 Grains of Water \| 1.57 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	40611 psi \| 2800 bar
LID:	LID_B6154_C311
Last updated:	2026-01-21

Load data for 52 loads in caliber .30 PICRA with .308 | 150gr | Speer TBBC bullet and 26 powder(s). The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	74%	36318	89%	**73	100%
ADI APS 350	<<locked>>	63%	35998	89%	**24	100%
ADI APS 450	<<locked>>	64%	36318	89%	**50	100%
Accurate 4100	<<locked>>	74%	36521	90%	**65	91%
[Accurate No. 11 FS]*	<<locked>>	83%	36477	90%	**65	84%
Accurate No. 9	<<locked>>	63%	35926	88%	**39	96%
Accurate TCM	<<locked>>	63%	35955	89%	**35	97%
Alliant 2400	<<locked>>	70%	35795	88%	**48	93%
Alliant BLUE DOT	<<locked>>	73%	35723	88%	**29	99%
Baschieri & Pellagri 102 Pistol	<<locked>>	75%	36201	89%	**99	100%
[Hodgdon H110]*	<<locked>>	78%	36158	89%	**75	87%
Hodgdon LilGun	<<locked>>	79%	35911	88%	**11	94%
Maxam CSB 1	<<locked>>	65%	35839	88%	**29	100%
Ramshot Enforcer	<<locked>>	71%	36506	90%	**68	95%
ReloadSwiss RS 14	<<locked>>	97%	24874	61%	**5	100%
ReloadSwiss RS 30	<<locked>>	95%	36405	90%	**07	91%
SNPE Vectan A0	<<locked>>	64%	35476	87%	**61	100%
SNPE Vectan BA6 1/2	<<locked>>	96%	36027	89%	**58	97%
SNPE Vectan BA7 1/2	<<locked>>	67%	35592	88%	**17	100%
[Somchem S265]*	<<locked>>	86%	36172	89%	**35	86%
Vihtavuori 3N38	<<locked>>	69%	36056	89%	**09	100%
Vihtavuori N105	<<locked>>	72%	35679	88%	**12	100%
Vihtavuori N110	<<locked>>	88%	36535	90%	**81	94%
Vihtavuori N32C Tin Star	<<locked>>	78%	35462	87%	**33	100%
Vihtavuori N350	<<locked>>	64%	36390	90%	**30	100%
[Winchester 296]*	<<locked>>	78%	36448	90%	**01	84%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	62%	26411	65%	**29	100%
ADI APS 350	<<locked>>	61%	34606	85%	**04	100%
ADI APS 450	<<locked>>	61%	33765	83%	**24	100%
[Accurate 4100]*	<<locked>>	61%	23975	59%	**48	83%
[Accurate No. 11 FS]*	<<locked>>	78%	31038	76%	**89	81%
Accurate No. 9	<<locked>>	61%	33924	84%	**09	95%
Accurate TCM	<<locked>>	61%	33939	84%	**06	96%
[Alliant 2400]*	<<locked>>	61%	27209	67%	**11	89%
Alliant BLUE DOT	<<locked>>	61%	25802	64%	**65	95%
Baschieri & Pellagri 102 Pistol	<<locked>>	61%	25773	63%	**1	100%
[Hodgdon H110]*	<<locked>>	68%	25295	62%	**91	80%
[Hodgdon LilGun]*	<<locked>>	61%	19029	47%	**93	81%
Maxam CSB 1	<<locked>>	60%	32198	79%	**86	100%
[Ramshot Enforcer]*	<<locked>>	61%	26310	65%	**01	89%
ReloadSwiss RS 14	<<locked>>	92%	23134	57%	**2	100%
[ReloadSwiss RS 30]*	<<locked>>	79%	23380	58%	**65	80%
SNPE Vectan A0	<<locked>>	61%	33025	81%	**29	100%
[SNPE Vectan BA6 1/2]*	<<locked>>	64%	15098	37%	**2	80%
SNPE Vectan BA7 1/2	<<locked>>	61%	30443	75%	**55	100%
[Somchem S265]*	<<locked>>	75%	27050	67%	**78	81%
Vihtavuori 3N38	<<locked>>	61%	28282	70%	**84	99%
Vihtavuori N105	<<locked>>	61%	24845	61%	**48	100%
[Vihtavuori N110]*	<<locked>>	63%	17332	43%	**20	80%
Vihtavuori N32C Tin Star	<<locked>>	65%	27093	67%	**2	100%
Vihtavuori N350	<<locked>>	61%	33141	82%	**88	100%
[Winchester 296]*	<<locked>>	73%	30647	75%	**02	80%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data